Description
Marco 110 000 10, P1
Compressed air horn for external mounting. Metal chromed trumpet, complete with fixing hardware, excluding control valves.
Listen Compressed air horn for external mounting
Features:
- Chromed metal
- External mounting
Technical data:
- Hz: 315
- dB(A) (2m): 118
- Mouth (mm): 80
- Length (mm): 390
- Weight: 0,7 Kg
- R. 28 ECE-ONU
- Reference: Marco 110 000 10
- Type: P1
Legal regulation
The horn is type-approved according to ECE Regulation 28 and must be installed so that there is a minimum sound pressure of 93 dB(A) at a distance of 7 m in front of the vehicle.
Installation
Mount the horn on the roof of the truck. Use the threaded tube for fastening the horn, previously shortened to the required length and rubbed off brass filings.
Possible methods of operation
Pull valve to be mounted directly at the compressedair connection of the horn. Provide hole for the cable for operating the valve in the vehicle headlining.
Foot valve to be installed in the floor of the driver’s cab. The driver must be able to operate the valve with his left foot.
Solenoid valve for vehicles with 12 and 24 V electrical system.
Pull valve
A. from pressure tank B. to engine brake valve 1. compressed air connecting tube 2. three way connection 3. pull valve 4. foot valve 5. solenoid valve 6. “L” connection 7. threaded tube
Foot valve
A. from pressure tank B. to engine brake valve 1. compressed air connecting tube 2. three way connection 3. pull valve 4. foot valve 5. solenoid valve 6. “L” connection 7. threaded tube
Solenoid valve
A. from pressure tank B. to engine brake valve 1. compressed air connecting tube 2. three way connection 3. pull valve 4. foot valve 5. solenoid valve 6. “L” connection 7. threaded tube
Dimensions
About MARCO
MARCO manufacture electric and air horns for cars, trucks and boats, as well as electric pumps for the transfer of various liquids.
These products are manufactured using the most advanced production equipment, such as spectrum analysers, vibrating stands, and other sophisticated instrumentation, including an anechoic chamber, for the development and testing of products.
Today the use of advanced technology enables MARCO to reach the highest International Quality Standards, allowing the creation of highly competitive products that are exported daily to over 80 countries.
