Description
Marco 162 002 12, UP1
Self-priming electric pump with rubber impeller for high performance and long life. For water and salt water transfer. The rubber impeller can tolerate impurities (max 5 mm), but not abrasive particles
Applications
- Water transfer
- Boat bilge water transfer
Fluids Allowed / Not Allowed
There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:
Fluids Allowed
Fresh Water and Sea Water (max 40 °C)
Water Containing Glycols
Warranty expiries if max fluid temperature is exceeded
Fluids Not Allowed
Petrol (Gasoline) => Danger: Fire / Explosion
Flammable Liquids with PM < 38 °C => Danger: Fire / Explosion
Liquids with viscosity > 20 cSt => Danger: Motor overheating
Corrosive chemical products => Danger: Pump corrosion – Injury to personnel
Solvents => Danger: Fire / Explosion – Damage to seals
Technical Data:
- Reference: Marco 162 002 12
- Voltage: 12V
- Fuse: A 20
- Flow rate: I/min 35
Internal tube Ø 25 mm, water at 25 °C - Pressure: bar 1,2
- Self priming: m 1,5
- Weight: 2,8 kg
- Wire size: mm2 2,5
Length up to 2 m - Type: Marco UP1
- 162 002 12
- IP 67: Code, International Protection Marking.
Dust tight: No ingress of dust; complete protection against contact (dust tight)
Immersion up to 1 m: Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion).
Ingress Protection code documentation
Impeller Pumps
Self-priming electric pumps with rubber impeller. The rubber impeller guarantees a high flow rate and allows the passage of small impurities in wastewaters.
Available with capacities from 28l/min up to 45 l/min and in versions with integrated on-off switch or flow reverser switch. Nickel-plated brass body and stainless steel shaft, FKM seals and NBR O-rings. Fitted with waterproof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849.
Installation
It is recommended that the use of the pump be according to normative safety standards and also as per the precautions listed below.
Preliminary Checks:
- Check that there has been no damage to the pump during transportation or storage.
- Both inlet and outlet ports should be carefully cleaned removing possible dust or residual packaging material.
- Verify that the available electrical power supply corresponds to the specification requirements
Positioning:
- The pump can be mounted in any position.
- Fix the pump utilizing suitable diameter screws corresponding to the holes.
Dimensions
Exploded View Diagram
1. Pump body 2. O-ring 3. Rod 4. Armature 5. Pump frame 6. O-ring 7. Washer 8. Nut 9. Impeller 10. O-ring 11. Top plate 12. Screw 13. Brush holder 14. Antivibration mount
Flow Rate Diagram
Ampere Draw diagram
About MARCO
MARCO manufacture electric and air horns for cars, trucks and boats, as well as electric pumps for the transfer of various liquids.
These products are manufactured using the most advanced production equipment, such as spectrum analysers, vibrating stands, and other sophisticated instrumentation, including an anechoic chamber, for the development and testing of products.
Today the use of advanced technology enables MARCO to reach the highest International Quality Standards, allowing the creation of highly competitive products that are exported daily to over 80 countries.
Delivery Services
We have a number of Home Delivery services available to you. Availability of these options will be shown at checkout.
International Delivery
We offer delivery to European and many international destinations. For European countries, prices start from £3.00 – €4.00 and are calculated at the checkout page. Click here for a price guide.
For non-European countries, please select your parts and check out normally selecting your country.
Returns
At QuickParts.mobi we hope that you are happy with your purchase, however we know that sometimes you will need to return or cancel an item. Any products returned must be in a re-saleable condition & include the original packing and documentation.
- Quickparts must be informed of any return requests within 30 days of the original order date.
- Before returning any goods please read our Terms and Conditions
You’ll find returns information on your delivery note. Unless faulty, we’d like you to make your return within 90 days of purchase. Exceptions apply to certain products – find out more about our refund policy.